|
|
Group | Publications | Project Overview | Facility | ||
2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 and Before Submitted Books Laboratory Manual |
2014 |
1 - Hamedani HA, Allam NK, Garmestani H,
El-Sayed MA. "Sr-Doped TiO2 Nanotube Arrays: Synthesis,
Characterization, and Enhanced Photoelectrochemical Water
Oxidation Characteristics." Journal of the Physical Chemistry
C. Accepted for publication. 2 - Tabei A, Fergani O, Garmestani H, Liang
SY. "Analysis of Micro-texture and Grain Size Distributions
in Machined Aluminum Alloy 7075." Innovative Materials:
Engineering and Applications. 2014;1052:489-94. doi:
10.4028/http://www.scientific.net /AMR.1052.489. PubMed
PMID: WOS:000348441700084. 3 - Legrand E, Bouhattate J, Oudriss A, Frappart S,
Creus J, Feaugas X, et al. "Response to comments on
"Computational analysis of geometrical factors affecting
experimental data extracted from hydrogen permeation
test: I - Consequences of trapping." Int J Hydrog Energy.
2014;39(34):19851-2. doi: 10.1016/j.ijhydene.2014.09.139.
PubMed PMID: WOS:000345192300046. 4 - Hamedani HA, Khaleel JA, Dahmen KH, Garmestani H.
"Surface Controlled Growth of Thin-Film Strontium
Titanate Nanotube Arrays on Silicon." Crystal Growth
& Design. 2014;14(10):4911-9. doi: 10.1021/cg500374m.
PubMed PMID: WOS:000342609300009. 5 - Hamedani HA, Baniassadi M, Sheidaei A, Pourboghrat F,
Remond Y, Khaleel M, et al. "Three-Dimensional
Reconstruction and Microstructure Modeling of
Porosity-Graded Cathode Using Focused Ion Beam
and Homogenization Techniques." Fuel Cells. 2014;
14(1):91-5. doi: 10.1002/fuce.201300170. PubMed
PMID: WOS:000331904000011. 6 - Hamedani HA, Allam NK, El-Sayed MA, Khaleel MA,
Garmestani H, Alamgir FM. "An Experimental Insight
into the Structural and Electronic Characteristics of
Strontium-Doped Titanium Dioxide Nanotube Arrays."
Advanced Functional Materials. 2014;24(43):6783-96.
doi: 10.1002/adfm.201401760. PubMed PMID:
WOS:000345225800005. 7 - Fergani O, Tabei A, Garmestani H, Liang SY.
"Prediction of polycrystalline materials texture evolution
in machining via Viscoplastic Self-Consistent modeling."
Journal of Manufacturing Processes. 2014;16(4):543-50.
doi: 10.1016/j.jmapro.2014.07.004. PubMed PMID:
WOS:000349566800014. 8 - Aliya D, Walker LW, Montz E, Pastor S,
Abad A, Hashim FA, et al. "Characterization of the Effects
of Active Filler-Metal Alloys in Joining Ceramic-to-Ceramic
and Ceramic-to-Metal Materials." In: Ochsner A, Murch G,
Belova I, editors. Advanced Diffusion Processes and
Phenomena 2014. p. 167-73. 9 - H. A. Hamedani, M. Baniassadi, A. Sheidaei,
F. Pourboghrat, Y. Remond, M. Khaleel, et al.,
"Three-Dimensional Reconstruction and Microstructure
Modeling of Porosity-Graded Cathode Using Focused Ion
Beam and Homogenization Techniques," Fuel Cells, vol. 14,
pp. 91-95, Feb 2014. 10 - M. Baniassadi, M. Safdari, H. Garmestani,
S. Ahzi, P. H. Geubelle, and Y. Remond, "An optimum
approximation of n-point correlation functions of
random heterogeneous material systems," Journal of
Chemical Physics, vol. 140, Feb 2014. |
2013 |
1 - M. J. Zehetbauer and H. Garmestani,
"Mechanics of Materials: Special Issue "Nanostructured
Materials" Preface," Mechanics of Materials, vol. 67, pp.
1-1, Dec 2013. 2 - M. Tehrani, M. Safdari, A. Y. Boroujeni,
Z. Razavi, S. W. Case, K. Dahmen, et al., "Hybrid carbon
fiber/carbon nanotubes composites for structural damping
applications," IOP, 2013. 3 - S. A. Tabei, A. Sheidaei, M. Baniassadi,
F. Pourboghrat, and H. Garmestani, "Microstructure reconstruction
and homogenization of porous Ni-YSZ composites for
temperature dependent properties," Journal of Power
Sources, vol. 235, pp. 74-80, Aug 2013. 4 - A. Sheidaei, M. Baniassadi, M. Banu,
P. Askeland, M. Pahlavanpour, N. Kuuttila, et al., "3-D
microstructure reconstruction of polymer nano-composite
using FIB-SEM and statistical correlation function," Composite s
Science and Technology, vol. 80, pp. 47-54, 2013. 5 - H. Rong, K.-H. Dahmen, H. Garmestani,
M. Yu, and K. I. Jacob, "Comparison of chemical vapor
deposition and chemical grafting for improving the
mechanical properties of carbon fiber/epoxy composites
with multi-wall carbon nanotubes," J Mater Sci, vol. 48,
pp. 4834-4842, 2013. 6 - L. S. C. Raptopoulos, G. A. Castello-Branco,
C. M. B. Bacaltchuk, I. Dragomir-Cernatescu, and H. Garmestani,
"Evolution and Prediction of Texture in Comercially Pure Warm
Rolled Titanium," in Functional and Structural Materials Ii. vol. 758,
S. DeBarros, P. M. CalasLopesPacheco, H. R. M. Costa, R. A. A. DeAguiar,
R. M. Gomes, and S. M. Torres, Eds., ed, 2013, pp. 99-105. 7 - P. Pooyan, I. T. Kim, K. I. Jacob, R. Tannenbaum,
and H. Garmestani, "Design of a cellulose-based nanocomposite
as a potential polymeric scaffold in tissue engineering," Polymer,
vol. 54, pp. 2105-2114, 2013. 8 - E. Legrand, J. Bouhattate, X. Feaugas, S. Touzain,
H. Garmestani, M. Khaleel, et al., "Numerical analysis of the
influence of scale effects and microstructure on hydrogen
diffusion in polycrystalline aggregates," Computational Materials
Science, vol. 71, pp. 1-9, 2013. 9 - H. A. Hamedani, S. W. Lee, A. Al-Sammarraie,
Z. R. Hesabi, A. Bhatti, F. M. Alamgir, et al., "Synthesis and
Growth Mechanism of Thin-Film TiO2 Nanotube Arrays on
Focused-Ion-Beam Micropatterned 3D Isolated Regions of
Titanium on Silicon," Acs Applied Materials & Interfaces,
vol. 5, pp. 9026-9033, Sep 2013. |
2012 |
1 - M. Tehrani, M. Al-Haik, H. Garmestani, and D. Li,
"Effect of Moderate Magnetic Annealing on the Microstructure,
Quasi-Static, and Viscoelastic Mechanical Behavior of a Structural
Epoxy," J. Eng. Mater. Technol. BRIDGING MICROSTRUCTURE,
PROPERTIES, AND PROCESSIN, vol. 134, 2012. 2 - P. Pooyan, R. Tannenbaum, and H. Garmestani,
"Mechanical behavior of a cellulose-reinforced scaffold in vascular
tissue engineering," Journal of the Mechanical Behavior of Biomedical
Materials, vol. 7, pp. 50-59, Mar 2012. 3 - E. Legrand, J. Bouhattate, X. Feaugas, and H.
Garmestani, "Computational analysis of geometrical factors affecting
experimental data extracted from hydrogen permeation tests: II -
Consequences of trapping and an oxide layer," International Journal
of Hydrogen Energy, vol. 37, pp. 13574-13582, Sep 2012. 4 - H. Hojjatie, W. Bartholomew, and H. Garmestani,
"Thermal Analyses of Dental Ceramic Restorations," in Proceedings
of the 2012 Annual Conference on Experimental and Applied Mechanics,
Mechanics of Biological Systems and Materials, 2012. 5 - J. Ho, R. Burrell, D. Li, D. McDowell, A. Rollett,
and H. Garmestani, "Effect of Twinning on Texture Evolution of Depleted
Uranium using a Viscoplastic Self-Consistent Model," in New Materials
and Processes for a New Economy, Charleston, SC 2012, p. 9. 6 - Z. R. Hesabi, K. A. Nageh, D. Klaus, H. Garmestani, and
M. A. El-Sayed, "Self-Standing Crystalline TiO2 Nanotubes/CNTs
Heterojunction Membrane: Synthesis and Characterization," Applied
Materials and Interfaces, 2012. 7 - M. Baniassadi, B. Mortazavi, H. A. Hamedani, H.
Garmestani, S. Ahzi, M. Fathi-Torbaghan, D. Ruch, and M. Khaleel,
"Three-dimensional reconstruction and homogenization of heterogeneous
materials using statistical correlation functions and FEM," Computational
Materials Science, vol. 51, pp. 372-379, Jan 2012. 8 - M. Baniassadi, A. Ghazavizadeh, Y. Remond, S. Ahzi, D.
Ruch, and H. Garmestani, "Qualitative Equivalence Between Electrical
Percolation Threshold and Effective Thermal Conductivity in Polymer/Carbon
Nanocomposites," Journal of Engineering Materials and Technology, vol.
134, pp. 010902-5, 2012. 9 - M. Baniassadi, S. Ahzi, H. Garmestani, D. Ruch, and Y.
Remond, "New approximate solution for N-point correlation functions for
heterogeneous materials," Journal of the Mechanics and Physics of Solids,
vol. 60, pp. 104-119, Jan 2012. 10 - B. S. Fromm, K. Chang, D. L. McDowell, L.-Q. Chen,
and H. Garmestani, "Linking phase-field and finite-element modeling for
process-structure-property relations of a Ni-base superalloy," Acta Materialia
vol. 60, pp. 5984-5999, 2012. 11 - A. Ghazavizadeh, N. Soltani, M. Baniassadi, F. Addiego, S. Ahzi, and H. Garmestani, "Composition of two-point correlation functions of subcomposites in heterogeneous materials," Mechanics of Materia, vol. 51, pp. 88-96, 2012. |
2011 |
1 - W. Miranda, G. Takiguchi, T. Shimabukuro, L. McLennan,
C. Agajanian, L. Quintero, D. Mismar, J. Abdulla, C. Andrews, M. Hahn, E.
Fodran, E. W. Lee, H. Garmestani, R. D. Conner, D. Brick, J. Ogren, and O. S.
Es-Said, "Innovative Manufacturing Process for Defect Free, Affordable,
High Pressure, Thin Walled, Hydraulic Tubing," Journal of Materials
Engineering and Performance, vol. 20, pp. 1206–121, 2011. 2 - J. Milhans, D. S. Li, M. Khaleel, X. Sun, and H.
Garmestani, "Prediction of the effective coefficient of thermal expansion
of heterogeneous media using two-point correlation functions," Journal of
Power Sources, vol. 196, pp. 3846-3850, Apr 2011. 3 - J. Milhans, D. S. Li, M. Khaleel, X. Sun, M. Al-Haik, A.
Harris, and H. Garmestani, "Mechanical properties of solid oxide fuel cell
glass-ceramic seal at high temperatures," Journal of Power Sources, vol.
196, pp. 5599–5603, 2011. 4 - D. S. Li, H. Zbib, H. Garmestani, X. Sun, and M.
Khaleel, "Modeling of irradiation hardening of polycrystalline
materials," Computational Materials Science, vol. 50, pp. 2496–2501, 2011. 5 - Z. R. Hesabi, N. Allam, K. Dahmen, H. Garmestani, and M.
El-Sayed, "Enhanced Photo-Assisted Water Splitting Using Titanium-Niobium
Mixed Oxide Nanotubes/CNTs Hybrid Electrodes , 2011 MRS Fall meeting &
Exhibit, Nov. 28-Dec 2, 2011, Hynes Convention Center, Boston, MA," 2011. 6 - H. A. Hamedani, B. M., M. Khaleel, S. Ahzi, D. Ruch, and
H. Garmestani, "Microstructure, Property and Processing Relation in
Gradient porous Cathode of Solid Oxide Fuel Cells Using Statistical Continuum
Mechanics," Journal of Power Sources vol. 196, pp. 6325-6331, 2011. 7 - H. A. Hamedani, N. K. Allam, H. Garmestani, and M. A.
El-Sayed, "Electrochemical Fabrication of Strontium-Doped TiONanotube
Array Electrodes and Investigation of Their Photoelectrochemical
Properties," J. Physical Chemistry, C, 2011. 8 - A. Ghazavizadeh, M. Baniassadi, M. Safdari, A. A. Atai,
S. Ahzi, S. A. Patlazhan, J. Gracio, and D. Ruch, "Evaluating the Effect
of Mechanical Loading on the Electrical Percolation Threshold of Carbon
Nanotube Reinforced Polymers: A 3D Monte-Carlo Study," Journal of
Computational and Theoretical Nanoscience, vol. 8, pp. 2087-2099, 2011. 9 - J. Bouhattate, D. S. Li, G. A. C. Branco, C. M. B.
Bacaltchuk, and H. Garmestani, "Texture Prediction of Cold- and Hot-Rolled
Titanium Using Processing Path Model," Journal of Materials Engineering
and Performance, vol. 20, pp. 177-184, Mar 2011. 10 - L. Baniassadi M, A., Makradi,A., Belouettar,S.,
Ruch,D., Muller,R., Garmestani,H., Toniazzo,V., Ahzi,S.,, "Statistical
Continuum Theory for the Effective Conductivity of Carbon nanotubes Filled
Polymer Composites," Thermochimica Acta, vol. 520, pp. 33-37, 2011. 11 - M. Baniassadi, M. Safdari, A. Ghazavizadeh, B. Mortazavi,
H. Garmestani, S. Ahzi, J. Grácio, and D. Ruch, "Incorporation of Electron
Tunneling Phenomenon into 3D Monte Carlo Simulation of Electrical Percolation
in Graphite Nanoplatelet Composites," Journal of Physics D: Applied Physics, vol. 44, pp. 1-8, 2011. 12 - M. Baniassadi, A. Laachachi, F. Hassouna, F. Addiego,
R. Muller, H. Garmestani, S. Ahzi, V. Toniazzo, and D. Ruch, "Mechanical
and thermal behavior of nanoclay based polymer nanocomposites using statistical
homogenization approach," Composites Science and Technology, vol. 71, pp.
1930-1935, Nov 14 2011. 13 - M. Baniassadi, H. Garmestani, D. S. Li, S. Ahzi, M.
Khaleel, and X. Sun, "Three-phase solid oxide fuel cell anode
microstructure realization using two-point correlation functions," Acta
Materialia, vol. 59, pp. 30-43, Jan 2011. 14 - M. Baniassadi, F. Addiego, A. Laachachi, S. Ahzi, H. Garmestani, F. Hassouna, A. Makradi, V. Toniazzo, and D. Ruch, "Using SAXS approach to estimate thermal conductivity of polystyrene/zirconia nanocomposite by exploiting strong contrast technique," Acta Materialia, vol. In Press, Corrected Proof, 2011. |
2010 | 1 - M. Safdari, M. Baniassadi, S. Asiaei, H. Garmestani, and
S. Ahzi, "Modeling of Biologically Inspired Adhesive Pads Using Monte
Carlo Analysis," Journal of Adhesion Science and Technology, vol. 24, pp.
1207-1220, 2010. 2 - J. Milhans, D. Li, M. Khaleel, X. Sun, and H.
Garmestani, "Statistical continuum mechanics analysis of effective elastic
properties in solid oxide fuel cell glass-ceramic seal material," Journal
of Power Sources, vol. 195, pp. 5726-5730, Sep 2010. 3 - J. Milhans, M. Khaleel, X. Sun, M. Tehrani, M. Al-Haik,
and H. Garmestani, "Creep properties of solid oxide fuel cell
glass-ceramic seal G18," Journal of Power Sources, vol. 195, pp. 3631-3635,
Jun 2010. 4 - A. Mikdam, A. Makradi, S. Ahzi, H. Garmestani, D. S. Li,
and Y. Remond, "Statistical continuum theory for the effective
conductivity of fiber filled polymer composites: Effect of orientation
distribution and aspect ratio," Composites Science and Technology, vol.
70, pp. 510-517, Mar 2010. 5 - D. S. Li, Z. Y. Liu, M. Al-Haik, M. Tehrani, F. Murray,
R. Tannenbaum, and H. Garmestani, "Magnetic alignment of cellulose
nanowhiskers in an all-cellulose composite," Polymer Bulletin, vol. 65, pp.
635-642, Sep 2010. 6 - D. S. Li, M. Khaleel, X. Sun, and H. Garmestani,
"Representation of correlation statistics functions in heterogeneous
materials using layered fast spherical harmonics expansion," Computational
Materials Science, vol. 48, pp. 133-139, Mar 2010. 7 - D. S. Li, M. Baniassadi, H. Garmestani, 8 - M. Baniassadi, A. Ghazavizadeh, M. Safdari, H.
Garmestani, and S. Ahzi, "Effect of mechanical deformation on electrical
percolation of CNT polymer composites," in ASME International Mechanical
Engineering Congress and Exposition, Proceedings, 2010, pp. 893-897. |
2009 |
1 - G. Vialle, M. Di Prima, E. Hocking, K. Gall, H.
Garmestani, T. Sanderson, and S. C. Arzberger, "Remote activation of
nanomagnetite reinforced shape memory polymer foam," Smart Materials &
Structures, vol. 18, Nov 2009. 2 - J. Milhans, S. Ahzi, H. Garmestani, M. A. Khaleel, X.
Sun, and B. J. Koeppel, "Modeling of the effective elastic and thermal
properties of glass-ceramic solid oxide fuel cell seal materials,"
Materials & Design, vol. 30, pp. 1667-1673, May 2009. 3 - A. Mikdam, A. Makradi, S. Ahzi, H. Garmestani, D. S. Li,
and Y. Remond, "Effective conductivity in isotropic heterogeneous media
using a strong-contrast statistical continuum theory," Journal of the
Mechanics and Physics of Solids, vol. 57, pp. 74-86, Jan 2009. 4 - A. Mikdam, A. Makradi, S. Ahzi, H. Garmestani, D. S. Li,
and Y. Remond, "A new approximation for the three-point probability
function," International journal of solids and structures, vol. 46, pp.
3782-3787, Oct 2009. 5 - S. M'Guil, S. Ahzi, H. Youssef, M. Baniassadi, and J. J.
Gracio, "A comparison of viscoplastic intermediate approaches for
deformation texture evolution in face-centered cubic polycrystals," Acta
Materialia, vol. 57, pp. 2496-2508, May 2009. 6 - D. S. Li, H. Garmestani, and J. Schwartz, "Modeling
thermal conductivity in UO2 with BeO additions as a function of
microstructure," Journal of Nuclear Materials, vol. 392, pp. 22-27, Jul
2009. 7 - D. S. Li, H. Garmestani, 8 - O. Hatamleh, P. M. Singh, and H. Garmestani,
"Corrosion susceptibility of peened friction stir welded 7075 aluminum
alloy joints," Corrosion Science, vol. 51, pp. 135-143, Jan 2009. 9 - O. Hatamleh, P. M. Singh, and H. Garmestani,
"Stress Corrosion Cracking Behavior of Peened Friction Stir Welded 2195
Aluminum Alloy Joints," Journal of Materials Engineering and Performance,
vol. 18, pp. 406-413, Jun 2009. 10 - H. Garmestani, M. Baniassadi, D. S. Li, M. Fathi, and
S. Ahzi, "Semi-inverse Monte Carlo reconstruction of two-phase
heterogeneous material using two-point functions," International Journal
of Theoretical and Applied Multiscale Mechanics, vol. 1, pp. 134-149, 2009. 11 - H. Garmestani, Baniassadi, M., Li, D.S., Fathi, M.,
Ahzi, S., "Semi-inverse Monte Carlo reconstruction of two-phase
heterogeneous material using two-point functions," International Journal
of Theoretical and Applied Multiscale Mechanics, vol. 1, pp. 134-149, 2009. 12 - A. Belvin, R. Burrell, A. Gokhale, N. Thadhani, and H.
Garmestani, "Application of two-point probability distribution functions
to predict properties of heterogeneous two-phase materials," Materials
Characterization, vol. 60, pp. 1055-1062, Sep 2009. |
2008 | 1-
Hoda Amani Hamedani,
Klaus-Hermann Dahmen, Dongsheng
Li, Houman Peydaye-saheli and Hamid Garmestani, Fabrication of
gradient porous LSM cathode by
optimizing deposition parameters in ultrasonic spray pyrolysis,
Accepted for
publication in Materials Science & Engineering B <pdf> 2- M. K. Singh, T. Shokuhfar, J. J. de Almeida Gracio, A. C. Mendes de Sousa, J. M. Da Fonte Fereira, H. Garmestani, S. Ahzi Hydroxyapatite Modified with Carbon Nanotube-Reinforced Poly(methyl methacrylate): A Novel Nanocomposite Material for Biomedical Applications, Adv. Funct. Mater. 2008, 9999, 1–7. <pdf> 3- S Saheli, H. Garmestani, A. Gokhale, Homogenization Relations for Elastic Properties of Two Phase Composites Using Two-Point Statistical Functions, accepted in the International Journal of Physics and Mechanics of Solids. P85-107, Vol. 3, No. 1, 2008 4- D.S. Li, H. Garmestani, A.O. Chu, H. Ahzi, G. Alapati, M. Khatonabadi, O.S. Es-Said, M.T. Siniawski, L. Matrisciano, S. Ahzi, Wear resistance and microstructure in annealed ultra high molecular weight polyethylenes, Journal of Polymer Science, Series A, Polymer Chemistry. May issue of "Polymer Science", vol. 50, n. 5, 2008 <pdf> |
2007 | 1-
D.S. Li, H. Garmestani, S. Ahzi,
Processing path
optimization to achieve desired texture in polycrystalline materials,
Acta
Materialia 55 (2007) 647–654. 2- Sheikh-Ali AD, Garmestani H, Evolution of surface and bulk textures during superplastic deformation in a zinc alloy, MATERIALS LETTERS 61 (2): 478-481 JAN 2007 3- H. Garmestani, D.S. Li, M.A. Khaleel. Microstructure sensitive design and quantitative prediction of effective conductivity in fuel cell design. Materials Science Form, 2007, vol 561-565. 4- Camponeschi, E., Vance, R., Al-Haik, M., Garmestani, H., Tannenbaum, R.; Properties of Carbon Nanotube Polymer Composites in a Magnetic Field, Carbon, 2007. 45(10): 2037-2046 |
2006 | 1-
Li DS, Saheli G, Khaleel M,
Garmestani, H., “Microstructure
optimization in fuel cell electrodes using materials design”,
CMC-COMPUTERS MATERIALS & CONTINUA 4 (1): 31-42 AUG 2006.
<pdf> 2- B. Z. Cui, K. Han, H. Garmestani, H. J. Schneider-Muntau, “Structure and magnetic properties of FePt and FePt-Ag nanostructured magnets by cyclic cold rolling” Journal of Applied Physics, 99, 1, 2006. <pdf> 3- B. Z. Cui, K. Han, Y. Zhang, J. P. Liu, H. Garmestani, S. Liu, H. J. Schneider-Muntau, Magnetic-field-induced Crystallographic Texture Enhancement in cold-deformed FePt Nanostructured Magnets, Journal of Applied Physics, 100, 013902 (2006). <pdf> 4- Al-Haik, M.S., M.Y. Hussaini, H. Garmestani, “Prediction of Nonlinear Vicoelastic Behavior of Polymeric Composites Using an Artificial Neural Network”, International Journal of Plasticity 22 (2006), 1367-1392. 5- Yan S. S., Garmestani H., Tian Y. F., et al. Free boundary domain wall pinning model for the magnetization reversal in magnetic thin films, Japanese Journal Of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers 45 (1a): 93-98 Jan 2006 6- Johnson F, Um CY, McHenry ME, et al., The influence of composition and field annealing on magnetic properties of FeCo-based amorphous and nanocrystalline alloys, Journal Of Magnetism and Magnetic Materials 297 (2): 93-98 Feb 2006. 7- Sheikh-Ali A.D., Molodov D.A. and Garmestani H., “Thermomagnetic Treatment of Zinc: Selective Grain Growth and Texture Modification,” Reviews of Advanced Materials Science, 2006, vol. 11, No 2, pp. 167-173. <pdf> 8- Park S. S., Garmestani H, Bae GT, et al. Constitutive analysis on the superplastic deformation of warm-rolled 6013 Al alloy, Materials Science And Engineering A-Structural Materials Properties Microstructure and Processing 435: 687-692 NOV 5 2006 9- D.S. Li, G. Saheli, M. Khaleel, H. Garmestani “Quantitative Prediction of Effective Conductivity in Anisotropic Heterogeneous Media Using Two–point Correlation Functions”, Computational Materials Science, 38, 1, 45-50 2006 <pdf> 10- Camponeschi E, Florkowski B, Vance R, et al. Uniform directional alignment of single-walled carbon nanotubes in. viscous polymer flow, Langmuir, 22 (4): 1858-1862 FEB 14, 2006. <pdf> 11- Dragomir IC, Castello-Branco GA, Ribarik G, et al. Burgers Vector Populations in hot rolled titanium determined by X-ray Peak Profile Analysis, ZEITSCHRIFT FUR KRISTALLOGRAPHIE : 99-104 Part 1 Suppl. 23 2006 |
2005 | 1- Gokhale
AM, Tewari A, Garmestani H, Constraints
on
microstructural two-point correlation functions SCRIPTA
MATERIALIA 53 (8): 989-993 OCT 2005 2- Cui, B. Z., C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, and H. J. Schneider-Muntau, “Magnetization Reversal and Nanostructure Refinement in Magnetically Annealed Nd2Fe14B/a-Fe-type Nanocomposites”, J. Appl. Phys. 97, 10F308 (2005). <pdf> 3- Zubris M, King RB, Garmestani H, Tannenbaum R, FeCo nanoalloy formation by decomposition of their carbonyl precursors, Journal Of Materials Chemistry 15 (12): 1277-1285 2005 4- J. Bouhattate, D. Li, H. Garmestani, S. Ahzi, M. Khaleel “On Improving Predictions of Texture Evolution Using Processing Path Model” Materialwissenschaft Und Werkstofftechnik 36 (10): 538-540 Oct 2005 <pdf> 5- D.S. Li, H. Garmestani, B.L. Adams, "A texture evolution model in cubic-orthotropic polycrystalline system", International Journal of Plasticity, 21 (2005) 1591–1617. <pdf> 6- D. S. Li, J. Bouhattate, H. Garmestani, Processing Path model to describe texture evolution during mechanical processing, Materials Science Forum; Vols 495-497, pp 977-982, 2005. <pdf> 7- Bacatchuck Castello-Branco, Garemestani, Magnetic field effect on the microstructure of low silicon steel, Materials Science Forum, Vols 495-497, pp 1165-1170, 2005 8- M. Al-Haik and M. Y. Hussaini, H. Garmestani, Adhesion energy in carbon nanotube-polyethylene composite: Effect of Chirality JOURNAL OF APPLIED PHYSICS 97, 074306, 2005. <pdf> 9- G. Jefferson, H. Garmestani, R. Tannenbaum, E. Todd, “Two-point probability distribution functions: application to block co-polymer nanocomposites”, International Journal of Plasticity. 185–198, 2005. <pdf> 10- G. Saheli, H. Garmestani, B. L. Adams, Microstructure Design of a Two Phase Composite using Two-point Correlation Functions, international Journal of Computer Aided Design, Volume 11, Numbers 2-3, January 2004, Pages: 103 – 115. 11- Bacaltchuk CMB, Branco GAC, Garmestani H, et al. “High magnetic field effect on texture and grain growth of GNO silicon steel”, MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK 36 (10): 561-565 OCT 2005 12- I. C. Dragomir, D.S. Li, G. A. Castello-Branco, H. Garmestani, R. L. Snyder, G. Ribarik and T. Ungar, "Evolution of dislocation density and character in hot rolled titanium determined by X-ray diffraction" Materials Characterization 55 (1): 66-74 Jul 2005 <pdf> 13- I. C. Dragomir, G. A. Castello-Branco, G. Ribarik, H. Garmestani, T. Ungar and R. L. Snyder "Burgers Vector Populations in hot rolled titanium determined by X-ray Peak Profile Analysis" by accepted for publication in Zeitschrift fur Kristallographie (2005). <pdf> |
2004 | 1-
D.S. Li, H. Garmestani, S.S. Yan etc., “Effect of High
Magnetic
Field Annealing on Texture and Magnetic Properties of FePd”, Journal of
Magnetism and Magnetic Materials, Journal of Magnetism and Magnetic
Materials, Volume 281, Issues 2-3 , October 2004, Pages 272-275
<pdf> 2- Johnson F, Garmestani H, Chu SY, et al., Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys (HITPERM) by very high field annealing, IEEE TRANSACTIONS ON MAGNETICS 40 (4): 2697-2699 Part 2 JUL 2004 3- L. Meda, C. Bacaltchuk, K. Dahmen, H. Garmestani, X-ray Diffraction residual stress calculation in textured La2/3Sr1/3MnO3 thin film, Journal of Crystal Growth Vol 263/1-4 pp 185-191, 2004 4- B. Z. Cui, K. Han, Y. Zhang, J. P. Liu, H. Garmestani, S. Liu, H. J. Schneider-Muntau, Crystallization, Morphology and Magnetic Properties of Melt-spun (Nd,Pr,Dy)2(Fe,Co,Mo)14B/a-Fe Nanocomposites, IEEE. Trans. Magn., 40 (2004) 2867-2870. <pdf> 5- C.M.B. Bacaltchuk, M. G. A. Castello-Branco H. Garmestani, A.D. Rollett, “Effect of Magnetic Field Applied During Secondary Annealing on Texture and Microstructure of Non-oriented Silicon Steel, Journal of Materials and Manufacturing Processes, vol 19, issue 4, p611-617, (2004). 6- M.S. Al-Haik, H. Garmestani, A. Savran, “Explicit and implicit viscoplastic models for polymeric composite”, International Journal of Plasticity, Vol. 20, Issue, 10, Oct-2004 pp 1875-1907, 2004. <pdf> 7- Shi-shen Yan, C. Ren, X. Wang, Y. Xin, and Z. X. Zhou, L. M. Mei, M. J. Ren, Y. X. Chen and Y. H. Liu, H. Garmestani, Ferromagnetism and magnetoresistance of Co–ZnO inhomogeneous magnetic semiconductors, Appl. Phys. Lett. 84, No. 13 MARCH 2004. 8- Al-Haik MS, Garmestani H, Li DS, et al., Mechanical properties of magnetically oriented epoxy , Journal of Polymer Science Part B-Polymer Physics 42 (9): 1586-1600 MAY 1 2004. <pdf> |
2003 | 1-
H. Garmestani, M. S. Al-Haik, K. Dahmen, R.
Tannenbaum, D.
Li, S. S. Sablin, and Y. Hussaini, “Polymer-Mediated Alignment Of
Carbon Nanotubes Under High Magnetic Fields”, Advanced Materials, Vol.
15, No. 22, Nov 17, 2003 <pdf> 2- G. A. Castello-Branco, Bacaltchuk, CMB, Garmestani, H, Effect of cold rolling on the annealing texture of a near-alpha titanium, MATER SCI FORUM 426-4: 701-706 2003. 3- Shi-Shen Yan, M. Elkawni, D. S. Li, and H. Garmestani, J. P. Liu, J. L. Weston and G. Zangari, Soft-hard exchange-coupled layered structures with modulated exchange coupling, Journal Of Applied Physics Volume 94, Number 7 1 October 2003. <pdf> 4- B. Z. Cui, K. Han, Y. Zhang, J. P. Liu, H. Garmestani, S. Liu, H. Schneider-Muntau, “Crystallization Behavior, Nanostructure and Magnetic Properties of Melt-spun (Nd,Pr,Dy)2(Fe,Co,Mo)14B/-Fe Nanocomposite Magnets”, accepted in IEEE. Transactions on Magnetics, 2004 5- E. S. Choi, J. S. Brooks, D. L. Eaton, M. S. Al-Haik and M. Y. Hussaini H. Garmestani and D. Li, K. Dahmen “Enhancement of thermal and electrical properties of carbon nanotube polymer composites by magnetic field processing”, Journal of Applied Physics, volume 94, Number 9, November 1sr, 2003. <pdf> 6- Bacaltchuk, CMB, Castello-Branco, GA, Gault, B, Garmestani, H. Effect of high magnetic field during primary annealing on texture of silicon steel MATER SCI FORUM 426-4: 3733-3738 2003 7- Sheikh-Ali AD, Garmestani H “Assessment of contribution of intragranular slip to grain boundary sliding in bicrystals” MATER SCI FORUM 447-4: 33-38 2003 <pdf> 8- C.M.B. Bacaltchuk, Ebrahimi M. G. A. Castello-Branco H. Garmestani, A.D. Rollett, “Effect of Magnetic Field Applied During Secondary Annealing on Texture and Grain size of Silicon Steel”. Scripta Materialia, vol 48, 1343-1347, (2003). <pdf> 9- A.D. Sheikh-Ali, D.A. Molodov and H. Garmestani, Migration and reorientation of grain boundaries in Zn bicrystals during annealing in a high magnetic field, pp 483-48, V. 48-5, 03-Mar-2003, Scripta Met. <pdf> 10- M.S. Al-Haik, H. Garmestani, and I.M. Navon, ” Truncated-Newton Training Algorithm for Neurocomputational Viscoplastic Model”, Comput. Methods Appl. Mech. Engrg.192 (2003)2249 –2267. <pdf> 11- A. Sheikh-Ali, Molodov, DA, Garmestani, H Boundary migration in Zn bicrystal induced by a high magnetic field, APPL PHYS LETT 82 (18): 3005-3007 MAY 5 2003 <pdf> 12- M. Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J. Foyos, E.W. Lee, P. Kalu, H. Garmestani, J. Ogren, O.S. Es-Said” On identifying the most critical step in the sequence of heat treating operations in a 7249 aluminum” Journal of Engineering Failure Analysis, Vol. 199-207, (2003). 13- D.S. Li, H. Garmestani, Scott Schoenfeld, “Evolution of Crystal Orientation Distribution Coefficients During Plastic Deformation”, Scripta Materialia, Volume 49, Issue 9, November 2003, 867-872 <pdf> 14- A. D. Sheikh-Ali, J. Szpunar and H. Garmestani, “Stimulation and Suppression of Grain Boundary Sliding by Intragranular Slip in Zinc Bicrystals” Interface Science, 11, 439-450, 2003 <pdf> 15- D. S. Li, H. Garmestani, R. G. Alamo, And S. R. Kalidindi, “The Role Of Crystallinity in The Crystallographic Texture Evolution Of Polyethylenes During Tensile Deformation”, Polymer 44 (18): 5355-5367 AUG 2003. <pdf> |
2002 |
1-
D. Li, H. Garmestani, “Texture Evolution and Stress
Relaxation of
Linear Low Density Polyethylene During Uniaxial Extension”, Polymeric
Materials: Science and Engineering, 2002, 86, 398. 2- Sheikh-Ali AD, Molodov DA and Garmestani H, “Magnetically Induced Texture Development in Zinc Alloy Sheet”, Scripta Materialia, 2002, vol.46, p-857. <pdf> 3- M.L. Weaver, C.W. Calhoun and H. Garmestani, “Microstructure, Texture, and Mechanical Properties of Continuously Cast Gamma TiAl,” Journal of Materials Science, v. 37, n. 12, pages 2483-2490 (2002). 4- Iskandar, D. Reyes, Y. Gaxiola, E. Fudge, J, Foyos, E.W. Lee, P. Kalu, H. Garmestani, O.S. Es-Said, “The Effect of Varying the Solution Treatment Temperature, Natural Aging Treatment and Artificial Aging Treatment on the Mechanical Strength of 7249 Aluminum Alloy”, Materials Science Forum, Vols. 396-402 pp. 1121-1126, (2002) 5- B.L. Adams, M. Lyon, B. Henrie, S.R. Kalidindi and H. Garmestani, “Spectral Integration of Microstructure and Design”, Materials Science Forum Vols. 408-412 (2002) pp. 493-498 6- H. Garmestani. S. R. Kalidindi, L. Williams, E. W. Lee, O. S. Es-Said, “Evolution of Anisotropy In Al-Li 2090-T8E41 Alloy: Experiments and Modeling”, The International Journal of Plasticity, pp 1373-1393, International Journal of Plasticity, Vol 18 Iss 10, Oct, 2002. <pdf> 7- M. AlHaik, H. Garmestani, “A Composite Cylinder Model for the Prediction of Residual Stresses in Gamma Titanium Composites", Journal of Materials Engineering and Performance, Volume 11(5) October 2002. <pdf> 8- A.D. Sheikh-Ali, D.A Molodov and H. Garmestani, Texture Development in Zn-1.1%Al under Strong Magnetic Field, Trans Tech Publications, Materials Science Forum Vols. 408-412 (2002) pp. 961-966. 9- Han K, Ishmaku A, Xin Y, Garmestani H, Toplosky VJ, Walsh R, Swenson C, Lesch B, Ledbetter H, Kim S, Hundley M, Sims JR Mechanical properties of MP35N as a reinforcement material for pulsed magnets, IEEE Transactions on Applied Superconductivity, 12 (1): 1244-1247 MAR 2002 <pdf> |
2001 | 1-
H. Garmestani, M. Vaghar, E. W. Hart, “A unified model for
inelastic deformation of polycrystalline materials –application to
transient behavior in cyclic loading and relaxation”, International
Journal of Plasticity. Vol. 17, no. 10, pp 1367-1391October, 2001.
<pdf> 2- Y. Xin, K. Han, N. Mateeva, H. Garmestani, P.N. Kalu, K. H. Dahmen, “Microstructures of La(1-x)A(x)(A = Ca or Sr)MnO3-delta thin films by liquid-delivery metalorganic chemical vapor deposition”, Journal of Materials Research, 16 (11): 3073-3083 NOV 2001 <pdf> 3- M. Al-Haik, H. Garmestani, “Durability Study of a Polymeric Composites for Structural Applications”, Journal of Polymer Composites, vol. 22, No. 6, December 2001 <pdf> 4- H. Garmestani, M. A. Zikry, “Inelastic Deformation and Failure”, International Journal of Plasticity, Editorial, Volume 17, Issue 10, October 2001, Pages 1303-1304 5- B. L. Adams, A. Henrie, B. Henrie, M. Lyon, S. R. Kalidindi, H. Garmestani, “Microstructure-Sensitive Design of A Compliant Beam”, J. Mech. Phys. Solids 49 (8): 1639-1663 Aug 2001 <pdf> 6- L. Meda, L Kennon, Cristiane Bacaltchuk, H. Garmestani, K. H. Dahmen, “Effects of thermal annealing on the texture of La0.67Sr0.33MnO3 thin films”, Journal of Materials Research, July 2001 Vol. 16, No. 7. <pdf> 7- D. Li, H. Garmestani, S. Kalidindi, and R. Alamo, “Crystallographic Texture Evolution in High Density Polyethylene During Uniaxial Tension”, Polymer, Vol. 42, (2001), pp. 4903-4913. <pdf> 8- A. D. Sheikh-Ali; H. Garmestani, “On the independent behavior of grain boundary sliding and intragranular slip during superplasticity”, Trans Tech Publications, Materials Science Forum, vol. 357-359, pp. 393-398, 2001. <pdf> 9- L. Meda, C. Bacaltchuck, K.H-Dahmen, H. Garmestani, “Residual strain and texture in strontium-doped lanthanum manganite thin films”, J. Mater. Sci. Mater. Electron 12, 143-146 (2001). <pdf> 10- R. Vaghar, H. Garmestani, “Three Dimensional Stress Analysis of Superconducting Magnets Using Green's Function Solution", Journal of Applied Mechanics. J App. Mech-T ASME 68 (1): 11-18 Jan 2001 <pdf> 11- H. Garmestani, S. Lin, B. Adams, S. Ahzi, “Statistical Continuum Theory for Texture Evolution of Polycrystals”, Journal of the Mechanics and physics of Solids 49, (2001) 589-607. <pdf> 12- M. Al-Haik, M.R. Vaghar, H. Garmestani, M. Shahawy, “Viscoplastic analysis of structural polymer composites using stress relaxation and creep data”, Composites: Part B 32 (2001) 165–170 <pdf> 13- H. Garmestani, M. Al-Haik, T. A. Townsley and C. Sabinash, Residual Stress Development During Fabrication and Processing of Gamma-Titanium Based Composites,” Scripta Met. Volume 44:1, pp 179-185, Jan, 2001. <pdf> |
2000 and Before | 1-
H. Garmestani, X. Dong, L. Brandao, H. Dahmen, “Texture
analysis
in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3
Materials”, Journal of Textures and Microstructures, Vol 34/2-3, pp
65-74, 2000. <pdf> 2- S. Lin, H. Garmestani, B. Adams, “The Evolution of Probability Functions in an Inelastically Deforming Two-Phase Medium”, International journal of solids and structures, Vol. 37, N. 3, pp. 423, 2000. <pdf> 3- H. Garmestani, S. Lin, “Statistical Continuum Mechanics Analysis of an Elastic Two-Isotropic-Phase Composite Material”, Journal of Composites: Part B, vol. 31, (2000) 39-46. <pdf> 4- M. Trinca, A. Avalino, H. Garmestani, J. Foyos, E. W. Lee and O. S. Es-Said, “Effect of Rolling Orientation on the Mechanical Properties and Crystallographic Texture of 2195 Aluminum-Lithium Alloy”, Materials Science Forum Vols 331-337, P849-854, 2000 5- D. W. Markiewicz, M. R. Vaghar, Iain R. Dixon, “Generalized plane strain analysis of superconducting solenoids”, H. Garmestani, Journal of applied physics., Vol. 86, N. 12, pp. 7039, 1999 <pdf> 6- H. Garmestani, K. Harris, “Orientation Determination by EBSP in an Environmental Scanning Electron Microscope”, Scripta Materialia 41: (1) 47-53 JUN 4 1999 <pdf> 7- E. W. Lee, P. N. Kalu, L. Brandao, O. S. Es-Said, J. Foyos, H. Garmestani, “The effect of off-axis thermomechanical processing on the mechanical behavior of textured 2095 Al-Li alloy”, Journal of Materials Science and Engineering, A265 (1999), P100-109. <pdf> 8- M.L. Weaver, L.P.M. Brandao, E.S. Gillman, K.H. Dahmen, and H. Garmestani, “Microcharacterization of LD-MOCVD Processed Thin Film Materials Exhibiting Giant Magnetoresistance,” Journal of Materials Research, Vol. 14, No. 5, May 1999. P2001-2007. 9- F. Booeshaghi and H. Garmestani, “On the Application of Load Relaxation in Characterizing Superplastic Al-Li 8090 Over Large Strain-Rate Regimes”, Journal of Scripta Materialia, P-1359-6462, Volume : 40, Issue : 4, 15-Feb-1999 <pdf> 10- N. Bednar, H. Garmestani, “Biaxial Testing of High Strength Carbon Fiber Composite Cylinders for Pulsed Magnet reinforcement”, Journal of Composites, Part A: Applied Science and Manufacturing, 30/2, 147-152 Dec.1998 <pdf> 11- F. Booeshaghi, H. Garmestani, “On the Existence of a Threshold Stress in Al-Li Superplastic Materials”, Scripta Materialia, Vol. 38, No. 1, pp. 89-94,1998. <pdf> 12- M.A. Zikry H. Garmestani, “Deformation and failure modes in multiphase materials”, Special issue: Int. J. Plasticity 14: (8) 671-671 1998 13- S. Lin, B. L. Adams, “Statistical continuum theory for inelastic behavior of two-phase medium”, H. Garmestani, Int. J. Plasticity 14: (8) 719-731 1998 <pdf> 14- H. Garmestani, P. Kalu, D. Dingley, “Micro-characterization of Al-8090 Superplastic Materials using Orientation Imaging Microscopy”, Journal of Materials Science and Engineering A. volume 242/1-2. pp 284-291, February 1998. <pdf> 15- M. L. Weaver, H. Garmestani, “Microstructures and Mechanical Properties of Commercial Titanium Foils Processed via the Melt Overflow Process”, Materials Science and Engineering A, v. A247, pages 229-238 (1998). <pdf> 16- K.E. Harris, F. Ebrahimi, and H. Garmestani, “Texture Evolution in NiAl”, Journal of Materials Science and Engineering A. Volume 247 (1998) 187-194 <pdf> 17- H. Garmestani, F. Booeshaghi, P. Kalu, “Micromechanical Investigation and Phenomenological Modeling of Al-8090 Superplastic Materials”, Materials Science Forum, vol. 243-245, 1997, pp. 569-574. <pdf> 18- J. Schwartz, Amm B. C., Garmestani H, et al., “Mechanical properties and strain effects in Bi2Sr2CaCu2Ox/AgMg composite conductors”, IEEE T APPL SUPERCON 7: (2) 2038-2041 Part 2 JUN 1997 19- R. Vaghar, H. Garmestani, D. Markiewics, “Elastoplastic Stress Analysis of Nb3Sn Superconducting Magnets”, Journal of Applied Physics, August 1996.Vol. 80, n4, p2490-2500, Aug 1996. <pdf> 20- A. Cox, D. Markiewics, H. Garmestani, I. Dixon, “Power Series Stress Analysis of Solenoid Magnets”, IEEE Transactions on Magnetics VOL. 32. NO. 4. July 1996. <pdf> 21- H. Garmestani, K. Harris, P. Kalu, “Orientation Imaging Microscopy in Environmental Scanning Electron Microscopy”, Journal Scanninig Microscopies, Vo. 20, 1 (1996). <pdf> 22- S. Mukherjee, H. Garmestani, N. Chandra, "Experimental Investigation of Thermal Stresses in MMCs Using Backscattered Kikuchi Diffractomery Method", Scripta Metallurgica et Materialia, Vol. 33, No.1, pp. 93-99, February 1995. <pdf> 23- H. Garmestani, R. Vaghar, D. Markiewics, N. Chandra, "Stress Analysis of an Anisotropic Work Hardening Cylinder with Body Forces", International Journal of Mechanics of Structures and Machines, Vol. 23, No.4, November 1995. 24- N. Chandra, K. Murali, and H. Garmestani, "Experimental and Numerical Investigation of Superplastic Deformation Mechanisms" Materials Science Forum Vols. 170-172 (1994) pp.47-52 <pdf> 25- H. Garmestani, R. Vaghar, W.D. Markiewics, "Concepts of Plasticity in Solenoid Stress Analysis," IEEE Transactions on Magnetics, VOL. 30, NO. 4, July 1994, PP. 2237-2240. <pdf> 26- W.D. Markiewics, M. R. Vaghar, I.R. Dixon, and H. Garmestani, "Generalized Plane Strain Analysis of Solenoid Magnets," IEEE Transactions on Magnetics, VOL. 30, NO. 4, JULY 1994, PP. 2233-2236. <pdf> 27- N. Chandra, C.R. Ananth, and H. Garmestani, "Micromechanical Modeling of Process-Induced Residual Stresses in Ti-24Al-11Nb/SCS-6 Composite," Journal of Composite Technology & Research, JCTRER, Vol. 16, No. 1, January 1994, PP. 37-46. <pdf> 28- E.W. Hart, H. Garmestani, "Mechanical Testing Using Direct Control of the Inelastic Strain Rate", Journal of Experimental Mechanics, 33 (1), March 1993, pp 1-6. 29- C. R. Ananth, N. Chandra, H. Garmestani, "Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", Computational Plasticity: Fundamentals and Applications, 1992, Ed. D.R.J. Owen, et. al., Pineridge Press, 2205-2216. 30- H. Garmestani, E. W. Hart, “Controlled Inelastic Strain Rate Experiments”, JOM, J. Min. Met. Mat. Sci., vol 40, (7), A55, Jul 1988. 31- Hamid Garmestani, Brent Adams, "Transient Small-Scale Yield Behavior of Textured Copper Tubing Under Biaxial Loading", Journal of Engineering Materials and Technology, 108, 127-134 April 1986. |
Submitted |
1 - D. S. Li, Z. Y. Liu, H. Garmestani, and M.
Al-Haik, "Fabrication of Unidirectional All Cellulose Nanowhisker
Composite. Polymer Bulletin," Submitted. 2 - Z. Razavi Hesabi, S. Kamrani, J. Gracio, 3 - Z. Razavi Hesabi, K. Dahmen, H. Garmestani, and
E. Olson, "Synthesis of carbon nanobelt with self-assembly properties
under magnetic field," submitted. 4 - Z. Razavi Hesabi, N. K. Allam, K. Dahmen, H.
Garmestani, and M. El-Sayed, "Self-standing crystalline TiO2
nanotubes/CNTs heterojunction membrane: Synthesis and characterization,"
Applied Materials and Interfaces,, Submitted. 5 - Z. Razavi Hesabi, N. K. Allam, K. Dahmen, H.
Garmestani, and M. El-Sayed, "Enhanced photoassisted water splitting using
crystalline Ti mixed oxide nanotubes /CNTs hetro nanostrutures,"
Submitted. 6 - P. Pooyan, R. Tannenbaum, and H. Garmestani,
"Mechanical Behavior of an Electrospun Cellulose-Reinforced Scaffold in
Cardiovascular Tissue Engineering," Journal of the Mechanical Behavior of
Biomedical Materials, submitted. 7 - P. Pooyan, I. T. Kim, R. Tannenbaum, and G. H.,
"Cellulose-based Nanocomposite as a Potential Scaffold in Cardiovascular
Tissue Engineering," Submitted. 8 - H. A. Hamedani, N. K. Allam, H. Garmestani, and
M. A. El-Sayed, "Sr-Doped TiO2 Nanotube Arrays: Synthesis,
Characterization, and Enhanced Photoelectrochemical Water Oxidation
Characteristics," Journal of the Physical Chemistry C, Submitted. 9 - N. M. Hamdan, M. El-Elkawni, B. Z. Cui, and H.
Garmestani, "Effect of High Magnetic Field Annealing on
Nd2.4Pr5.6Dy1Fe84Mo1B6 Nanocomposites:
a Circular Magnetic Dichrosim Study," journal of Mechanics of Advanced
Materials & Structures, Submitted. |
Books |
1-
"Advances in Superplasticity and Superplastic Forming",
Edited by N. Chandra, H. Garmestani, R. E. Goforth, A TMS Publication,
Proceedings of a Symposium sponsored by the MDMD Shaping and Forming
Committee,
held at the TMS/ASM Materials Week 2-5 November, 1992.
2- Deformation and failure modes in multiphase materials”, Zikry MA, Garmestani H, Special issue: Int. J. Plasticity 14: (8) 671-671 1998.
3- Special issue on: "Inelastic Deformation and Failure" in honor of Professor E.W. Hart on his 80th birthday – Editorial, INT J PLASTICITY 17 (10): 1303-1304 2001. |
Laboratory Manuals | 1- "Experimental Methods in Solid Mechanics," H. Garmestani, Used for the junior level course in experimental mechanics in the Dept. of Mechanical Engineering at FAMU/FSU College of Engineering. |